[VIP第3年] 指數:4
?
?
?
?
通過認證?[誠信檔案]
| 牌號 Type |
粘度 Viscosity Pa.s |
膠凝時間 Gel Time min |
固體含量 Solid Content % |
特性與用途 Performance & Applications |
| 196 | 0.60-1.2 | 6-18 | 63-70 | 鄰苯型通用樹脂，通過船級社認證，強度及剛性好，耐沖擊。適用于普通模具。 Orthophthalic general purpose resin, good strength and flame retardant, authenticated by China Classification Society, good strength and toughness, shock resistance, suitable for common mold. |
| 198 | 0.55-1.0 | 6-15 | 60-67 | 鄰苯型耐熱樹脂，強度及剛性好。適用于有中等耐熱要求的模具。 Orthophthalic heat resistance resin, good strength and rigidity, suitable for mold required medium heat resistance. |
| 199 | 0.35-0.65 | 10-15 | 58-64 | 間苯型耐熱樹脂，強度及剛性好。適用于有較高耐熱要求的模具。 Isophthalic heat resistance resin, good strength and rigidity, suitable for mold, required higher heat resistance. |
| 946 | 0.35-0.50 | 5-12 | 61-67 | DCPD型樹脂，溫峰低，收縮小，強度和剛性好，吸水率低。適用于高強度、低收縮的模具。 DCPD type resin, lower peak of exotherm temperature, small shrinkage, good strength and rigidity, lower water absorption, suitable for mold required high strength and low shrinkage. |
| VER-2 | 0.30-0.50 | 20-30 | 55-61 | 雙酚A型環氧乙烯基酯樹脂，高強度耐沖擊，性能優異。適用于性能要求高的模具。 Bisphenol A vinyl resin, high strength, shock resistance, good property, suitable for mold required high performance. |
| 946PT-3 | 0.30-0.50 | 10-22 | 10-22 61-67 | DCPD型預促觸變樹脂，抗流掛，浸潤和消泡性好，強度高，收縮小。適用于高強度、低收縮的模具。 DCPD pre-promoted thixotropic resin, anti-sagging, good wetting and defoaming, high strength, small shrinkage, suitable for mold required high strength and low shrinkage. |
