Yz27系列 4000T框式拉伸機_模壓工藝專用液壓機_【模壓成型設備】_玻璃鋼加工設備_供應信息

本系列產品適用于汽車、航空航天、家電、軍工等行業熱固性、熱塑性塑料制品成型。

復合材料種類多，目前市場上液壓機成型中廣泛應用的復合材料有玻璃纖維、炭纖維、玄武巖纖維等主導材料。

液壓機在產品工藝中主要承擔模壓成型工藝，利用各異型的模具，通過高壓與熱固成型。根據模具與產品配方不同，制造出各種形狀、各種顏色、各種強度的復合材料產品。

l 主要用于熱固性（玻璃鋼）塑料制品、熱塑性制品的整體模壓成型，適用于SMC、BMC、DMC、GMT等各種團材及片材的模壓成形；
It is mainly used for the integral forming of thermosetting (FRP) plastics and thermoplastic products. Suitable for the forming of SMC, BMC, DMC, GMT and other bulks and sheets.
l 八面式導向結構，加大導向面積，抗篇載能力強；
Eight sides guiding structure, enlarge guiding area, greatly improved incline load proof capacity.
l 多缸均布結構，橫梁加高式設計，模壓成型穩定性更強；
Uniform distribution of multiple cylinders, design of Cross Beam Heightening, making the forming process more stable.
l 液壓系統安裝在機頂上，配維修平臺，環保，噪音低，維保方便；
Hydraulic system is installed on the roof with maintenance platform, environmentally friendly, low noise and easy maintenance.
l ≥500mm/s速度快速合模，可分多段速度慢速加壓成型，合理預留排氣時間；
Shutting mold speed more than 500mm/s, multiple-stage slow speed pressure forming, reasonable reserved exhaust time
l 高壓慢開模功能，適用于較高的產品；
With the function of high pressure slow opening mold, suitable for high products.
l 伺服系統快速響應，全數字化控制，油泵功率節能40%-80%；
l Quick response of system, numerical control system, the energy saving rate of oil pump can reach 40%-80%.
l 微電腦閉環加熱控制系統，溫控可達±2℃，模具加熱節電10%以上;
Microcomputer closed-loop heating control system, temperature control can reach ±2℃, mold heating energy saving more than 10%.
l 可選：廢氣凈化系統，換模小車，遠程售后服務系統，雙閉環伺服系統；
l Optional accessories: waste gas purification system, mold change car, VPN remote after-sale service system, double closed loop servo system.
l 采用雙閉環伺服系統壓力控制精度可達±0.05Mpa，位置控制精度可達±0.01mm；
The pressure control accuracy of double closed-loop servo system can reach ±0.05 Mpa， and the position control accuracy can reach ±0.01 mm.