• l 主要用于熱固性（玻璃鋼）塑料制品、熱塑性制品的整體模壓成型，適用于SMC、BMC、DMC、GMT等各種團材及片材的模壓成形；
• It is mainly used for the integral forming of thermosetting (FRP) plastics and thermoplastic products. Suitable for the forming of SMC, BMC, DMC, GMT and other bulks and sheets.
• l 八面式導向結構，加大導向面積，抗篇載能力強；
• Eight sides guiding structure, enlarge guiding area, greatly improved incline load proof capacity.
• l 多缸均布結構，橫梁加高式設計，模壓成型穩定性更強；
• Uniform distribution of multiple cylinders, design of Cross Beam Heightening, making the forming process more stable.
• l 液壓系統安裝在機頂上，配維修平臺，環保，噪音低，維保方便；
• Hydraulic system is installed on the roof with maintenance platform, environmentally friendly, low noise and easy maintenance.
• l ≥500mm/s速度快速合模，可分多段速度慢速加壓成型，合理預留排氣時間；
•  Shutting mold speed more than 500mm/s, multiple-stage slow speed pressure forming, reasonable reserved exhaust time
• l 高壓慢開模功能，適用于較高的產品；
• With the function of high pressure slow opening mold, suitable for high products.
• l 伺服系統快速響應，全數字化控制，油泵功率節能40%-80%；
• l Quick response of system, numerical control system, the energy saving rate of oil pump can reach 40%-80%.
• l 微電腦閉環加熱控制系統，溫控可達±2℃，模具加熱節電10%以上;
• Microcomputer closed-loop heating control system, temperature control can reach ±2℃, mold heating energy saving more than 10%.
• l 可選：廢氣凈化系統，換模小車，遠程售后服務系統，雙閉環伺服系統；
• l Optional accessories: waste gas purification system, mold change car, VPN remote after-sale service system, double closed loop servo system.
• l 采用雙閉環伺服系統壓力控制精度可達±0.05Mpa，位置控制精度可達±0.01mm；
• The pressure control accuracy of double closed-loop servo system can reach ±0.05 Mpa， and the position control accuracy can reach ±0.01 mm.
• 

高品質(通過ISO9001質量體系,CE歐盟安全認證,完善的售后回訪制度,嚴格把關每一個細節,做到每臺設備都在優化改進)